Epoxy trowel coating top finish is a coating based on epoxy resin, which has excellent wear resistance, corrosion resistance, chemical resistance, and water resistance. It is mainly composed of epoxy resin, pigments, additives, and solvents, and is applied to the surface of the substrate through the trowel coating construction method to form a flat and smooth coating.
The main components of epoxy trowel coating top finish include:
Epoxy resin:
As the main film-forming substance, it provides the basic properties of the paint film.
Pigments:
Provide rich color options for topcoats to meet different decorative needs.
Additives:
Improve the performance of coatings, such as leveling, adhesion, etc.
Solvent:
Used to adjust the viscosity of coatings for easy application.
The construction method usually includes the following steps:
1.Remove dust, heavy oil stains, and other debris from the surface of the substrate to keep it dry.
2.Mix the coating thoroughly and let it mature if necessary.
3.Use a trowel for troweling construction to ensure a smooth and even coating.
4.The next layer of coating construction can only be carried out after the coating is dry.
Epoxy trowel coating top finish is widely used in the coating and protection of industrial floors, concrete walls, and metal surfaces. In factories, hospitals, schools, shopping malls and other places, epoxy trowel topcoat can effectively improve the wear resistance and corrosion resistance of the ground, and extend the service life of the ground. It has excellent technical performance, including high hardness, strong wear resistance, chemical corrosion resistance, etc., and is suitable for various industrial and construction fields.
Maintenance and upkeep:
During use, attention should be paid to the following points when applying epoxy trowel topcoat:
It is strictly prohibited to come into contact with substances such as water, oil, acid, alkali, etc.
Construction should not be carried out on rainy or snowy days, when the temperature is below 5 ℃, and when the humidity is above 85%.
Once the epoxy topcoat is mixed, it must be used up within 4 hours to avoid viscosity increase or gelatinization and scrap.
Hot Tags: epoxy trowel coating top finish, China epoxy trowel coating top finish manufacturers, suppliers, factory, Transparent Epoxy Self Leveling, Anti corrosion Alkyd Primer, Thinner Specific for High Wear Resistant, Epoxy Trowel Coating Top Finish, Primer Specific for Stainless Steel, Eppu Full Matte Finish Coating
