When using curing agent, pay attention to the following matters:
Construction environment: The construction temperature of the curing agent should be above 5℃, and the theoretical drying time is 8 hours. During construction, ensure that the environment is dry and ventilated to avoid inhaling harmful gases.
Mixing and stirring: When using curing agent, it must be strictly mixed according to the proportion in the instructions, and stir while adding to ensure uniform mixing. After mixing, it should be left to stand for 10 to 15 minutes to expel small bubbles before use.
Storage conditions: Unused curing agent should be sealed and stored in a dry, cool, ventilated, and heat-insulated place, avoiding direct sunlight and open flames.
Safety measures: Wear a mask, gloves and goggles during construction to prevent the curing agent from contacting the skin or eyes. If it accidentally contacts the skin or eyes, rinse immediately with plenty of clean water and seek medical help in time.
Ground preparation: Before using the curing agent, the ground must be clean, dry and oil-free. Use professional equipment for thorough cleaning, and use a sander to remove old coatings or stains if necessary.
Curing time: The curing agent takes a certain amount of time to cure after application, usually 24 to 48 hours, depending on the ambient temperature and humidity. People and vehicles should be avoided during this period.
Subsequent maintenance: After the curing agent cures, it needs to be cleaned and maintained regularly, using a neutral detergent and a soft mop, and avoid using strong acidic or alkaline detergents.







