No More Worries About Epoxy Textured Coating Construction! Understand The Solution in One Article To Achieve The Ideal Floor

Sep 29, 2025 Leave a message

Epoxy Textured Floor Coating (Orange-Peel Epoxy Floor Coating)

1. Scope of Application

Suitable for garage driveways, canteens with mild anti-slip requirements in offices, and other industries that require aesthetics, wear resistance, impact resistance, and chemical resistance, such as schools, offices, and underground garages.

news-600-338

2. Product Features

A. Textured surface increases floor friction, achieving anti-slip and noise reduction effects;

B. Wear-resistant, pressure-resistant, and impact-resistant;

C. Resistant to corrosion by acids, alkalis, salts, and oils;

D. Thickness: 1mm-3mm.

 

3. Construction Process

1. Substrate Preparation: Grind and clean the floor, then vacuum;

2. Primer Coating Construction: Mix solvent-free epoxy primer at a ratio of 2:1, stir evenly with a hand drill, and roll-coat directly on the floor, with an application amount of no less than 0.2KG/㎡;

3. Mid-Coat Mortar Layer: Mix solvent-free epoxy mid-coat at a ratio of 2:1, add an appropriate amount of quartz sand and powder, stir evenly with a hand drill, and trowel directly on the floor; the application amount depends on the actual thickness requirement;

4. Mid-Coat Putty Layer: Mix solvent-free epoxy mid-coat at a ratio of 2:1, add an appropriate amount of 100-mesh quartz powder (No. 10 sand), and trowel the putty layer; the application amount depends on the actual thickness requirement;

5. Topcoat Sealing Layer: Mix the same-color textured topcoat at a ratio of 5:1, and trowel directly on the floor, with an application amount of no less than 0.1KG/㎡;

6. Textured Topcoat Layer: Mix the textured topcoat at a ratio of 5:1, stir evenly with a hand drill, and trowel or roll-coat on the floor. After applying the material, construction personnel wear spiked shoes to level the surface evenly with a texturing roller in horizontal and vertical directions. The application amount can be adjusted according to the customer's requirements for different sizes of textured floors, ranging from 0.4-0.6 KG/㎡.

[Tags] Epoxy Floor; Epoxy Floor Coating; Floor Coating Renderings; Polyurethane Floor Coating; How Much Does Floor Coating Cost Per Square Meter

[Editor Responsible]